Test Parameters | Specification |
---|---|
Product | MLPBS3L3 |
Contact Resistance | 15mΩ max. (initial value) |
Humidity | General purpose type: 85% RH max., Sealed type: 95% RH max. |
Vibration testing/ Mechanical Shock | 10-55Hz, 1.5mm double amplitude |
Operating Frequency | Mechanical: 240 operations/min. Electrical: 20 operations/min. |
Characteristics | |
---|---|
Operation speed | 0.01mm-1m/sec |
Operating frequency | Mechanical: 240 operations/min. Electrical: 20 operations/min. |
Contact resistance | 15mΩ max. (initial value) |
Dielectric strength | 1000VAC, 50/60 Hz for 1 minute between terminals of the same polarity |
1500VAC, 50/60 HZ for 1 minute between current-carrying and non-current- carrying metal parts | |
1500VAC, 50/60 HZ for 1 minute between each terminal and ground | |
Vibration | 10-55Hz, 1.5mm double amplitude |
Humidity | General purpose type: 85% RH max., Sealed type: 95% RH max. |
Warranty | 24 Months* |
Utilization Category for Limit Switches | ||
---|---|---|
Kind of Current | Category | Typical Application |
Alternative Current | AC-15 | Control of Electromagnetic Load > 72 VA |
Direct Current | DC-13 | Control of Electromagnets |
Contact Rating Designation Based on Utilization Catagories | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Designation | Utilization Catagory | Conventional Enclosed Thermal Current | Rated Operational Current (A) at Rated Operational Voltage | VA Ratings | ||||||
Resistance Load | 120 V | 240 V | 380 V | 480 V | 500 V | 600 V | Make | Break | ||
AC-15 | 10 | 6 | 3 | - | - | - | - | - | 7200 | 720 |
Direct Current | 125V | 250 V | 400 V | 500 V | 600 V | Make | Break | |||
P600 | DC-13 | 5 | 1.1 | 0.55 | 0.31 | 0.27 | 0.2 | 138 | 138 |
DOOR LIMIT SWITCHES FOR AUTOMOBILES FROM ESBEE
Door LImit switches for automobiles from Esbee are used to control or regulate the functioning of the door. As the name suggests, the door limit switch is used for limiting the functioning of the door. Door limit switches from Esbee come in different categories and for technical specifications and details you can refer to the table for the reference.